Website: www.OzoneSolutions.com
Email: support@ozonesolutions.com
Phone: (712) 439-6880
Hours: 8 AM - 5 PM Central Time

AVO3: Ozone Compatible Air Vent

See through design

Features

  • See-through body shows it is working
  • Completely ozone compatible
  • Quick installation
  • Rugged, dependable
  • Serviceable design
  • Quantity discounds available

(See Full Specifications)

AVO3 $465.68
Stock: In Stock

Overview

This ozone compatible air vent safely removes ozone from pressurized vessels. All ozone compatible materials ensure years of life. See-through material allows quick visual inspection.

The AVO3 can remove 4.3 SCFM @ 15-PSI pressure differential or 24.3 SCFM @ 150-PSI pressure differential.

Specifications

Fluid Connection 34 Inch FNPT
Max O3 Concentration 3%
Flow Rate 1 CFM
 
= 0.000472 m3/s
= 1 CFM
= 60 CFH
= 7.480519 GPM
= 28.316847 Lpm
= 28,316.846636 ml/min
Materials Stainless Steel, Polysulfone, Viton®
Max Pressure 150 PSI (10.55 Bar)
 
= 1,034,197.462769 Pa
= 1,034,197.462769 N/m2
= 150 PSI
= 10.545712 bar
= 305.398333 inHg
Max Temperature 150°F (65.56°C)
Warranty 1 Years
Dimensions Length: 6.8 in (17.1 cm) Diameter: 3.5 in (8.9 cm)
Weight 1.3 lbs (0.59 kg)
 
= 5.782688 N
= 1.3 lb
= 0.58967 kg
= 589.670081 g
= 589,670.081 mg
= 20.8 oz

Support

Frequently Asked Questions

  1. How do I know if I need an ozone compatible air vent?

    An ozone compatible air vent is needed if you intend to fill a vessel with ozonated water and keep it under pressure. Air vents ensure that air/ozone can escape from a water tank thereby preventing air from collecting inside. Remember that in certain ozone injection setups, ozone/air can also collect in water pipes. If this occurs ozone gas will be ejected out of nozzles which can cause harm to personnel. An air vent can keep your employees safe!

  2. What is important when considering an air vent?

    One of the most important features in an air vent is a large process connection. The process connection on the AVSS-11 is 3/4-in FNPT. This is important because water and air must pass through the process connection at the same time, in different directions.

  3. What is important when considering an air vent?

    One of the most important features in an air vent is a large process connection. The process connection on the AVO3 is 3/4-in FNPT. This is important because water and air must pass through the process connection at the same time, in different directions.

Last Updated: March 17, 2015

The above information is from http://www.OzoneSolutions.com and is copyrighted by Ozone Solutions Inc.
Jump To TopOzone Solutions Inc. | (712) 439-6880Jump To Top
8 AM - 5 PM Central Time
Phone: (712) 439-6880
Toll Free: (888) 892-0303 (USA Only)
Fax: (712) 439-6733
Email: support@ozonesolutions.com
CLOSE WINDOW