The Model 106-H is a high concentration ozone monitor designed for measuring and controlling output concentration of a high concentration ozone generator. Ozone is measured in the range 0-20 wt% with a precision of 0.01 wt% or 2% of reading by the method of UV absorbance. The instrument has the option of a water-proof NEMA enclosure.
|CUV-1 Carrying Case||This is an extremely rugged pelican case to carry your UV-106 in.|
|ODS-1 Destruct Unit||This is an inexpensive ozone destruct unit, made for removing high concentrations of ozone efficiently.|
|FM-6-2 Ozone Compatible Flowmeter||Designed for specifically for corrosive ozone gas flow-rates, this flow-meter is a precision instrument embodying the inherent simplicity, versatility and economy of the classical variable area meter.|
30 feet of tubing would be the maximum length of tubing recommended.
This is a bug that occasionally occurs. The following procedure clears up the problem: 1) "Transmit" existing data (this may take some time) 2) "End" the data logging session 3) Log 4 or 5 new data points 4) "End" the data logging session 5) Turn the instrument off When you restart the device, data logging should be off and should stay off - if not, try repeating steps 4 - 6 again. (Please refer to the Operation Manual for your device if you have questions on how to "Transmit", start or end datalogging sessions).
The manufacturer provides their software and drivers downloads on their website.
Use "2B Tech Display and Download Software" and "Model 106 USB Driver" downloads for the UV-106.
Last Updated: March 18, 2015