Website: www.OzoneSolutions.com
Email: support@ozonesolutions.com
Phone: (712) 439-6880
Hours: 8 AM - 5 PM Central Time

ODS-3P: 180-SCFH Ozone Destruct Unit

Ozone Destruct unit for dry process air applications

Features

  • 180 SCFH flowrate at 1% ozone
  • 99.9% Efficient
  • Low cost
  • low pressure drop
  • True catalytic reaction, no consumables
  • O2 and minimal heat are the only by-products

(See Full Specifications)

ODS-3P $278.25
Lead Time: 0 seconds

Overview

The ODS-3P is a low priced, PVC Ozone Destruct unit that can destroy low concentration ozone in gas streams (less than 1% conc. by wt.)at up to 180 SCFH (3 SCFM). The PVC design allows for low cost assembly, with many of the benefits of the more expensive models.

Specifications

Max Flow Rate 3 CFM
 
= 0.001416 m3/s
= 3 CFM
= 180 CFH
= 22.441558 GPM
= 84.95054 Lpm
= 84,950.539908 ml/min
Efficiency 99.9%
Inlet/Outlet Connections 3/8-inch FNPT
Heater Band no
Humidity Range 0 to 35%
Max O3 Concentration 1%
Operation Modes Continuous
Pressure Drop 0.0 to 0.25 PSI (0.0 to 0.02 Bar)
Process Stream Dry gas stream
Warranty 1 Years
Electrical Not Applicable
Dimensions Length: 18 in (45.7 cm) Diameter: 4 in (10.2 cm)
Weight 10 lbs (4.54 kg)
 
= 44.482216 N
= 10 lb
= 4.535924 kg
= 4,535.9237 g
= 4,535,923.7 mg
= 160.000001 oz

Support

Documents / Downloads

How It Works

Last Updated: March 17, 2015

The above information is from http://www.OzoneSolutions.com and is copyrighted by Ozone Solutions Inc.
Jump To TopOzone Solutions Inc. | (712) 439-6880Jump To Top
8 AM - 5 PM Central Time
Phone: (712) 439-6880
Toll Free: (888) 892-0303 (USA Only)
Fax: (712) 439-6733
Email: support@ozonesolutions.com
CLOSE WINDOW