Website: www.OzoneSolutions.com
Email: support@ozonesolutions.com
Phone: (712) 439-6880
Hours: 8 AM - 5 PM Central Time

Standard Felt Liquid Filter Bag

 
Request Information
* Required Name * Email * Phone Application / Industry Details *
Rental Systems May Be Available

Standard Felt Liquid Filter Bags

  • Micron ratings from 1 to 200
  • All industry-standard and custom sizes available
  • Broad chemical compatibility
  • High flow/low pressure drop media
  • Sewn or fully-welded construction
  • Handles standard on all bags
  • Choice of steel or molded plastic snap seal rings
  • Temperature ratings to 275°F (PE w/S, SS or V-seal ring) and 425°F (HT w/S or SS ring)

Felt Bag Materials

Constructed using 100% synthetic fibers in polypropylene, polyester and Nomex®. The proper combination of fiber diameters, weights and thicknesses result in economical depth filter medias.
Polypropylene & polyester bags are supplied with a singed or glazed finish to reduce fiber migration.

  • Polypropylene and Polyester materials meet FDA regulations for food contact under CFR21, Section 177.1520
  • Glazed/singed finish on polyester & polypropylene reduces fiber-shedding
  • Ability to remove both solid and gelatinous particles
  • Silicone-free construction
  • High dirt holding capacity
  • Low cost

Felt Bag Styles

S-ring bags have a galvanized steel ring (stainless steel optional) sewn into the top of the bag. They are supplied with sewn seams standard.
V-ring bags have a specially-designed, high-temperature snap seal ring sewn into the top of the bag. They are supplied with sewn seams standard (fully -welded seams available upon request).

Welded Construction

Fully-welded bags are available in glazed polypropylene and polyester felt for #1 & #2 sizes with V-seal molded plastic rings.
- No needle holes, thus increasing efficiencies by preventing by-pass
- Elimination of threads further reduces fiber-shedding

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

Rating (µ)

Felt Materials1351015255075100150200
Polyesterxxxxxxxxxxx
Polypropylenexxxxxxxx
Nomex®xxxxxxxx

Bag Options

MediaRating (µ)Cover/JacketDiameter X LengthRing StyleOptions
Polyester1-200Plain (No Cover)7.06" X 16.5" Galvanized SteelFully-Welded (PE and PP Only)
PolypropylenePolyester Multifilament Mesh7.06" X 32.0"Stainless SteelNo Outer Finish
Nomex®4.12" X 8.0"High-temp Plastic Snap SealNo Ring
4.12" X 14.0"Commercial-Style Band (7.31" Diameter only)Rev. Collar (Galvanized & Stainless Steel only)
5.5" X 15.0"Polypropylene (rolled)Automotive Seam
5.5" X 20.0"
5.5" X 31.0"
7.31" 16.5"
7.31" X 32.5"
8.0" X 30.0"

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

The above information is from http://www.OzoneSolutions.com and is copyrighted by Ozone Solutions Inc.
Jump To TopOzone Solutions Inc. | (712) 439-6880Jump To Top

8 AM - 5 PM Central Time
Phone: (712) 439-6880
Toll Free: (888) 892-0303 (USA Only)
Fax: (712) 439-6733
Email: support@ozonesolutions.com
CLOSE WINDOW