Website: www.OzoneSolutions.com
Email: support@ozonesolutions.com
Phone: (712) 439-6880
Hours: 8 AM - 5 PM Central Time

High Purity - Polysulfone (PS)

 
Request Information
* Required Name * Email * Phone Application / Industry Details *
Rental Systems May Be Available

Hydrophilic Polysulfone Membrane Cartridges are an exceptional choice for ultra-high purity water and aqueous fluid applications. GHPS series cartridges offer extremely high flowrates and service-life while filtering to 0.05-1.2µm. GHPS cartridges are constructed using high purity polypropylene support materials and hardware and assembled using the latest thermal-bonding equipment. This results in an exceptionally clean cartridge that rinses to 18 megohms with minimal throughput. The Extended Area option (GHPSX) offers up to 40% more surface area. This additional areas results in significant increases in flowrate and loading capacity in the same footprint.

Construction Materials

Membrane.............................................Polysulfone
Support Media ..............................Polypropylene
End Caps...........................................Polypropylene
Center Core .....................................Polypropylene
Outer Support Cage....................Polypropylene
O-Rings/Gaskets.............Buna, EPDM, Silicone, Viton®, Teflon® Encapsulated Viton®

Sanitization/Sterilization

Filtered Hot Water..................... 80°C for 30 min.
Steam Sterilization................121°C for 30 min., multiple cycles
Chemicals: Cartridges are chemically compatible with most chemicals and sanitizing agents.
Note: Stainless steel insert option needed for all cartridges being hot water sanitized or steam sterilized.

Dimensions

Length: 10 to 40 inches (25.4 to 101.6 cm) nominal
Outside Diameter: 2.70 inches (7.0 cm) nominal

Maximum Recommended Operating Conditions

Temperature........................................176°F (80°C)

Maximum Differential Pressures

Forward............................. 50 PSI (3.4 bar) at 20°C
Reverse.............................. 40 PSI (2.7 bar) at 20°C

FDA Listed Materials

Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

Toxicity

All polypropylene components meet the specifications for biological safety per USP Class VI - 121°C for plastics.

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

Cartridge Options

Rating (µ)LengthEnd Cap StyleO-Rings/GasketsAdders
0.0510” (25.4 cm)DOE Flat GasketBunaStainless Steel Insert
0.120” (50.8 cm)222 w/ FinEPDMHeavy Poly Core
0.230” (76.2 cm)222 w/ Flat CapSilicone18 Megohm Rinse
0.4540” (101.6 cm)226 w/ Flat CapViton®316ss Compression Spring
0.65226 w/ FinTeflon® Encapsulated Viton®
0.8213 Internal O-RingTeflon® Encapsulated Silicone
1.2
The above information is from http://www.OzoneSolutions.com and is copyrighted by Ozone Solutions Inc.
Jump To TopOzone Solutions Inc. | (712) 439-6880Jump To Top

8 AM - 5 PM Central Time
Phone: (712) 439-6880
Toll Free: (888) 892-0303 (USA Only)
Fax: (712) 439-6733
Email: support@ozonesolutions.com
CLOSE WINDOW