Website: www.OzoneSolutions.com
Email: support@ozonesolutions.com
Phone: (712) 439-6880
Hours: 8 AM - 5 PM Central Time

High Purity - Pharmaceutical Grade PTFE

 
Request Information
* Required Name * Email * Phone Application / Industry Details *
Rental Systems May Be Available

PPTFE Pharmaceutical Grade sterilizing filter cartridges provide optimized filtration performance in sterile air/gas and venting applications. The single layer PTFE membrane, with over double the hydrophobicity of polypropylene or PVDF, is the best choice to prevent water intrusion and resulting microbial growth.

Each PPTFE cartridge is integrity tested during manufacturing and is supported by a validation guide for regulatory compliance. PPTFE elements are fully validated as sterilizing grade filters in liquids in accordance with HIMA and ASTM F838-05 guidelines and in gases through full retention of the MS2 phage in an aerosol challenge.

Dimensions

Length: 5 to 40 inches (12.7 to 101.6 cm) nominal
Outside Diameter: 2.70 inches (7.0 cm) nominal

Construction Materials

Membrane..........................................................PTFE
Prefiltration Media......................Polypropylene
Support Layers..............................Polypropylene
Cage/Core/Adapters...................Polypropylene
Seals .....................................Buna, EPDM, Silicone, Viton®, Teflon® Encapsulated Viton®

Sanitization/Sterilization

In-Line Steaming........134°C, 30 min., max. Pressure Drop 7 psi
Hot Water...... 85°- 95°C, 30 min., max. Pressure Drop 7 psi

Maximum Recommended Operating Conditions

Temperature................248°F (120°C) at 20 PSID
Forward....................72 PSI (5 bar) at 68°F (20°C), 7 PSI (0.5 bar) at 284°F (140°C)
Reverse.....................44 PSI (3 bar) at 68°F (20°C), 7 PSI (0.5 bar) at 284°F (140°C)

Toxicity

All polypropylene components meet the specifications for biological safety per USP Class VI - 121°C for plastics.

FDA Listed Materials

Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

Cartridge Options
Rating (µ)Length, NominalEnd Cap StyleO-Ring/Gaskets
0.25” (12.7 cm)DOE Flat GasketBuna-N
10” (25.4 cm)222 w/ FinEPDM
20” (50.8 cm)222 w/ Flat CapSilicone
30” (76.2 cm)226 w/ Flat CapViton®
40” (101.6 cm)226 w/ FinTeflon® Encapsulated Viton®
Teflon® Encapsulated Silicone

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

The above information is from http://www.OzoneSolutions.com and is copyrighted by Ozone Solutions Inc.
Jump To TopOzone Solutions Inc. | (712) 439-6880Jump To Top

8 AM - 5 PM Central Time
Phone: (712) 439-6880
Toll Free: (888) 892-0303 (USA Only)
Fax: (712) 439-6733
Email: support@ozonesolutions.com
CLOSE WINDOW