Website: www.OzoneSolutions.com
Email: support@ozonesolutions.com
Phone: (712) 439-6880
Hours: 8 AM - 5 PM Central Time

High Purity - Hydrophobic Polysulfone (PSH) Membrane

 
Request Information
* Required Name * Email * Phone Application / Industry Details *
Rental Systems May Be Available

Hydrophobic Polysulfone Membrane Cartridges provide a highly cost-effective alternative to PTFE or PVDF membrane cartridges for air, bulk gas, and tank vent applications. PSH cartridges offer high moisture resistance and high flowrates at low pressure drops. Constructed using high purity polypropylene hardware and the latest thermal-bonding equipment, PSH series cartridges offer an outstanding value.

Construction Materials

Membrane.................Hydrophobic Polysulfone
Support Media ..............................Polypropylene
End Caps...........................................Polypropylene
Center Core .....................................Polypropylene
Outer Support Cage....................Polypropylene
O-Rings/Gaskets.............Buna, EPDM, Silicone, Viton®, Teflon® Encapsulated Viton®

Sanitization/Sterilization

Filtered Hot Water..................... 80°C for 30 min.
Steam Sterilization................121°C for 30 min., multiple cycles
Chemicals: Cartridges are chemically compatible with most chemicals and sanitizing agents.
Note: Stainless steel insert option needed for all cartridges being hot water sanitized or steam sterilized.

Dimensions

Length: 10 to 40 inches (25.4 to 101.6 cm) nominal
Outside Diameter: 2.70 inches (7.0 cm) nominal

Maximum Recommended Operating Conditions

Temperature........................................176°F (80°C)

Maximum Differential Pressures

Forward............................. 50 PSI (3.4 bar) at 20°C
Reverse.............................. 40 PSI (2.7 bar) at 20°C

FDA Listed Materials

Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

Toxicity

All polypropylene components meet the specifications for biological safety per USP Class VI - 121°C for plastics.

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

Rating (µ)LengthEnd Cap StyleO-Rings/GasketsAdders
0.0210” (25.4 cm)DOE Flat GasketBunaStainless Steel Insert
0.0320” (50.8 cm)222 w/ FinEPDMHeavy Poly Core
30” (76.2 cm)222 w/ Flat CapSilicone316ss Compression Spring
40” (101.6 cm)226 w/ Flat CapViton®
226 w/ FinTeflon® Encapsulated Viton®
213 Internal O-RingTeflon® Encapsulated Silicone

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

The above information is from http://www.OzoneSolutions.com and is copyrighted by Ozone Solutions Inc.
Jump To TopOzone Solutions Inc. | (712) 439-6880Jump To Top

8 AM - 5 PM Central Time
Phone: (712) 439-6880
Toll Free: (888) 892-0303 (USA Only)
Fax: (712) 439-6733
Email: support@ozonesolutions.com
CLOSE WINDOW