Website: www.OzoneSolutions.com
Email: support@ozonesolutions.com
Phone: (712) 439-6880
Hours: 8 AM - 5 PM Central Time

High Purity - Fluoroclear Pleated All-Fluorocarbon

 
Request Information
* Required Name * Email * Phone Application / Industry Details *
Rental Systems May Be Available

FluoroClear Cartridges are designed for highly aggressive wet-etch and cleaning applications. FluoroClear cartridges are constructed with 100% fluorocarbon
materials, providing broad chemical compatibility and temperature resistance. The PTFE membrane delivers high flow rates and high purity effluent at low pressure
drops. Cartridges are available as flushed & dried or as wet-packed (High Purity DI water/ hydrogen peroxide solution). FluoroClear cartridges are manufactured in a cleanroom environment to ensure product cleanliness.

Construction Materials

Membrane..........................................................PTFE
Support Media .............................................. ECTFE
End Caps........................................................... ECTFE
Center Core ..................................................... ECTFE
Outer Support Cage.................................... ECTFE
O-Rings/Gaskets............. Teflon® Encapsulated Viton®

Sanitization/Sterilization

FluoroClear cartridges may be sanitized using compatible chemical agents.
FluoroClear cartridges may not be autoclaved or steam sterilized.

Integrity Testing

0.05µ less than or equal to 5 cc \ min at 40 psig (2.76 bar)
0.1µ less than or equal to 5 cc \ min at 40 psig (2.76 bar)
0.2µ less than or equal to 5 cc \ min at 30 psig (2.07 bar)
0.45µ less than or equal to 5 cc \ min at 20 psig (1.38 bar)
1µ less than or equal to 5 cc \ min at 15 psig (1.38 bar)

Dimensions

Length: 10 to 40 inches (25.4 to 101.6 cm) nominal
Outside Diameter: 2.70 inches (7.0 cm) nominal

Maximum Recommended Operating Conditions

Temperature.....................................215°F (102°C)

Maximum Differential Pressures

Forward..............60 PSI (4.14 bar) at 70°C (21°C)
Reverse...............30 PSI (2.07 bar) at 70°C (21°C)

FDA Listed Materials

Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

Toxicity

All components meet the specifications for biological safety per USP Class VI - 121°C for plastics.

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

Cartridge Options
Rating (µ)LengthEnd Cap StyleO-Rings/GasketsAdders
0.0510” (25.4 cm)DOE Flat GasketTeflon® Encapsulated Viton®Flushed & Dried
0.120” (50.8 cm)222 w/ FinTeflon® Encapsulated SiliconeWet-Packed
0.230” (76.2 cm)222 w/ Flat Cap
0.4540” (101.6 cm)226 w/ Flat Cap
1.0226 w/ Fin

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

The above information is from http://www.OzoneSolutions.com and is copyrighted by Ozone Solutions Inc.
Jump To TopOzone Solutions Inc. | (712) 439-6880Jump To Top

8 AM - 5 PM Central Time
Phone: (712) 439-6880
Toll Free: (888) 892-0303 (USA Only)
Fax: (712) 439-6733
Email: support@ozonesolutions.com
CLOSE WINDOW