Website: www.OzoneSolutions.com
Email: support@ozonesolutions.com
Phone: (712) 439-6880
Hours: 8 AM - 5 PM Central Time

High Purity - Electronics Grade PTFE

 
Request Information
* Required Name * Email * Phone Application / Industry Details *
Rental Systems May Be Available

EPTFE Electronics Grade filter cartridges provide superior chemical resistance for high-purity microelectronics applications requiring contaminant removal to 0.02µ. The EPTFE Series offers consistent removal of contaminants from aggressive fluids and organic solvents. In air and gas applications, the single-layer PTFE membrane, delivers superior hydrophobicity to polypropylene or PVDF; offering the best option to prevent water retention, flow blockage and microbial growth. The extend-area option offers up to 40% more surface area. This additional area results in significant increases in flowrate and loading capacity in the same footprint.

Integrity

Each cartridge is flushed to 18 megohlms UPW and 100% integrity tested to deliver ultra-clean effluent as well as ultra-low extractables.

Dimensions

Length: 10 to 40 inches (25.4 to 101.6 cm) nominal
Outside Diameter: 2.70 inches (7.0 cm) nominal

Construction Materials

Membrane..........................................................PTFE
Support Layers..............................Polypropylene
Cage/Core/Adapters...................Polypropylene
Seals .....................................Buna, EPDM, Silicone, Viton®, Teflon® Encapsulated Viton®

Cartridges are available with wet-pack option (60/40 IPA/DI water solution) to eliminate the need to wet-out in the environment.

Maximum Recommended Operating Conditions

Temperature....................................... 176°F (80°C)
Forward.................50 PSI (3.4 bar) at 68°F (20°C), 7 PSI (0.5 bar) at 176°F (80°C)
Reverse................. 40 PSI (2.7 bar) at 68°F (20°C), 7 PSI (0.5 bar) at 176°F (80°C)

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

Cartridge Options
Rating (µ)Length, NominalEnd Cap StyleO-Rings/GasketsOptions
0.02 / 20 (nm)10” (25.4 cm)DOE Flat GasketBuna-NStainless Steel Insert
0.03 / 30 (nm)20” (50.8 cm)222 w/ FinEPDMWet-Packed
0.0530” (76.2 cm)222 w/ Flat CapSilicone
0.140” (101.6 cm)226 w/ Flat CapViton®
0.2226 w/ FinTeflon® Encapsulated Viton®
Teflon® Encapsulated Silicone

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

The above information is from http://www.OzoneSolutions.com and is copyrighted by Ozone Solutions Inc.
Jump To TopOzone Solutions Inc. | (712) 439-6880Jump To Top

8 AM - 5 PM Central Time
Phone: (712) 439-6880
Toll Free: (888) 892-0303 (USA Only)
Fax: (712) 439-6733
Email: support@ozonesolutions.com
CLOSE WINDOW