Website: www.OzoneSolutions.com
Email: support@ozonesolutions.com
Phone: (712) 439-6880
Hours: 8 AM - 5 PM Central Time

High Flow Cartridges

 

 
Request Information
* Required Name * Email * Phone Application / Industry Details *
Rental Systems May Be Available

High Flow Cartridges address your need for absolute rated filter cartridges in high flowrate applications. High Flow cartridges are designed for use as a direct replacement to the Highflow Ultipleat® and 3M 740 series elements. Filtration efficiencies exceed 99%.

Construction Materials

Filtration Media ............................Polypropylene
or Microglass
Support Media ..............................Polypropylene
End Caps...........................................Polypropylene
Center Core .....................................Polypropylene
Outer Support Cage....................Polypropylene
O-Rings/Gaskets...............................Buna, EPDM, Viton®, Silicone

Dimensions

Length:
HF - 20, 40, 60 inches
HF3 - 39 inches
Outside Diameter: 6.25 inches

Maximum Recommended Operating Conditions

Differential Pressure................................... 35 PSI
Polypropylene...................................160°F (71°C)
Microglass ...........................................200°F (93°C)

FDA Listed Materials

Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

Clean Pressure Drop Versus Flow Rate (PSID)
1 micron5 micron10 micron20 micron50 micron100 micron
Pressure Drop @ 40 GPM2.01.00.50.30.20.2
Pressure Drop @ 60 GPM4.01.50.80.50.30.3
Pressure Drop @ 80 GPM5.02.01.20.70.50.5

Pressure Drop is based on a 20" filter cartridge
* Pressure Drop for 40" element multiply by 0.5
* Pressure Drop for 60" element multiply by 0.34

Cartridge Options
TypeMaterialRating (µ)LengthO-Rings
HF (Retrofits Pall HF)Polypropylene1.020” = HF (50.8 cm)Buna
HF3 (Retrofits 3M-740)Microglass5.039” = HF3 (99.1 cm)EPDM
10.040” = HF (101.6 cm)Silicone
20.060” = HF (152.4 cm)Viton®
50.0
100.0

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

The above information is from http://www.OzoneSolutions.com and is copyrighted by Ozone Solutions Inc.
Jump To TopOzone Solutions Inc. | (712) 439-6880Jump To Top

8 AM - 5 PM Central Time
Phone: (712) 439-6880
Toll Free: (888) 892-0303 (USA Only)
Fax: (712) 439-6733
Email: support@ozonesolutions.com
CLOSE WINDOW