Website: www.OzoneSolutions.com
Email: support@ozonesolutions.com
Phone: (712) 439-6880
Hours: 8 AM - 5 PM Central Time

High Purity - Pleated Microglass Cartridge

 
Request Information
* Required Name * Email * Phone Application / Industry Details *
Rental Systems May Be Available

Pleated Microglass Cartridges offer an economical, absolute rated, filtration solution for both liquids and gases. They offer excellent flow rates and long service life with an exceptional ability to retain both deformable and non-deformable particles.
FG cartridges are constructed with absolute rated borosilicate microglass media that offers high dirtloading capacities. The natural positive charge of the glass also aids in the retention of negatively charged particulates such as bacteria, endotoxins and a variety of colloidal materials. FG cartridges are offered in both absolute (to 99.98%) and nominal (90%) retention efficiencies.

Construction Materials

Filtration Media - FDA Borosilicate Microglass with acrylic binder.
Support Media - Spun-bonded polyester laminated on both upstream and downstream sides.
End Caps...........................................Polypropylene
Center Core ................................. Glass-reinforced Polypropylene
Outer Support Cage....................Polypropylene
O-Rings/Gaskets.............Buna, EPDM, Silicone, Viton®, Teflon® Encapsulated Viton®
Note: Contact factory for information on high temperature stainless construction options.

Sanitization/Sterilization

Filtered Hot Water..................... 80°C for 30 min.
Steam Sterilization................121°C for 30 min., multiple cycles
Chemicals: Cartridges are chemically compatible with most chemicals and sanitizing agents.
Note: Stainless steel insert option needed for all cartridges being hot water sanitized or steam sterilized.

Dimensions

Length: 10 to 40 inches (25.4 to 101.6 cm) nominal
Outside Diameter: 2.75 inches (7.0 cm) nominal

Maximum Recommended Operating Conditions

Change Out...............................................Pressure Drop 35 PSI
Temperature........................................200°F (93°C)
Note: Optional High Temperature Construction available.

FDA Listed Materials

Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations.

Toxicity

All polypropylene components meet the specifications for biological safety per USP Class VI - 121°C for plastics.

DISCLAIMER: Filtration data presented is representative of performance observed in controlled laboratory testing. It is not given as a warranty, specification or statement of fitness for use. Specific performance can vary widely depending on contaminant type, fluid properties, flow rates and environmental conditions. It is recommended that users conduct thorough qualification testing to assure the product functions as required.

Cartridge Options

Rating (µ)RetentionLengthEnd Cap StyleO-Rings/GasketsAdders
0.2Absolute10” (25.4 cm)DOE Flat GasketBunaStainless Steel Insert
0.45Nominal20” (50.8 cm)222 w/ FinEPDMStainless Steel Core
1.030” (76.2 cm)222 w/ Flat CapSilicone316ss Compression Spring
2.040” (101.6 cm)222 w/ SpringViton®18 Megohm Rinse
5.0226 w/ Flat CapTeflon® Encapsulated Viton®
10.0226 w/ FinTeflon® Encapsulated Silicone
20.0226 w/ Spring
40.0213 Internal O-Ring
The above information is from http://www.OzoneSolutions.com and is copyrighted by Ozone Solutions Inc.
Jump To TopOzone Solutions Inc. | (712) 439-6880Jump To Top

8 AM - 5 PM Central Time
Phone: (712) 439-6880
Toll Free: (888) 892-0303 (USA Only)
Fax: (712) 439-6733
Email: support@ozonesolutions.com
CLOSE WINDOW