80 Gram/Hour Ozone Injection System
80 Gram/Hour enclosure mounted ozone injection system
This ozone injection system is simple to setup and use. This system will Inject 80 g/hr ozone into water.
The WS-80 is a Complete turnkey ozone injection system built inside a weather-tight enclosure. This injection system is not only extremely convenient and versatile, but can even be placed in harsh environments!
Features
- Enclosure mounted to withstand harsh environments
- Introduces 80 grams/hour of ozone into water
- System designed for dissolved ozone levels above 10 ppm
- Dimensions: 25-in Deep x 50-in Wide x 60-in Tall
- Turnkey system is easy to setup and put into use
- System fits with many applications
- Excess ozone is destroyed safely
- Dissolved ozone level is measured and recorded
- All safety sensors are built in
- Stainless Steel off-gas tank
- Tri-clamp connections are used
| Product ID: | WS-80 | |
| Lead Time: | 3 weeks |
Potential Applications
Specific Applications that the WS-80 can be used for.
| Wet Scrubbers - chemical replacement |
| Groundwater Remediation – pump and treat systems |
| Clean-in-Place Systems |
| Cooling Towers |
| Flour Milling temper water treatment |
Specifications
Ozone Production: | 80 g/hr |
Ozone Concentration: | 6.5% by weight (90 g/m3) |
Oxygen Production: | 15 LPM O2 @ 93% purity |
Capacity: | Will dissolve ozone into water at the following rates: |
20 GPM with 10 ppm ozone | |
10 GPM with 20 ppm ozone | |
Wetted Materials: | Stainless Steel, Viton seals & Kynar injector |
Power Requirements: | 220V/60Hz 1-phase |
Compressed AIr Requirement: | 6 CFM of compressed air at 90 PSI |
Maximum Operating Water Pressure:: | 50 PSI (3.5 Bar) |
Maximum Water Pressure: | 100-PSI (7 bar) |
Cooling: | Industrial cabinet coolers used to cool enclosure |
Connections: | 1-1/2" Tri-Clamp Connections |
Warranty: | 1-year |
Dimensions | 60-inches wide x 25-inches deep x 66-inches tall |
Weight: | 750lbs shipping weight |
Safety Sensors and Controls | |
AS-500 | Dissolved Ozone Sensor |
Ozone Switch | Ambient Ozone Sensor (inside enclosure) |
Temp Switch | High Temperature switch and alarm (inside enclosure) |
Flow Switch | Water Flow Switch, ensures adequate water flow |
Air Pressure Switch | Low air pressure switch |
Oxygen Pressure Switch | Low oxygen pressure switch |
Oxygen Flow | Oxygen flow meter (panel mounted) |
