Nema 4X Ozone Injection System
Stainless Steel Nema 4X Ozone Injection System
The Waterzone-SS-40 is an ozone injection system installed within a Stainless Steel Nema 4X enclosure. The popular Waterzone-40 is packaged entirely within this stainless steel enclosure for operation within the harshest of environments. Washdown areas, or other harsh areas are no problem for this system
Features
- Stainless Steel Nema 4X Enlcosure
- Introduces 40 grams/hour ozone into up to 70 GPM water flows
- Produces ozone from integrated Oxygen Concentrator
- Will provide 50 GPM Water Flow with 2.0 PPM Dissolved Ozone Level
- Dimensions: 20-in Deep x 38-in Wide x 66-in High - 500 Lbs
- Customizable system can be configured for your specific application
- Very efficient with excellent mass transfer of ozone
- Stainless Steel ASME off-gas tank
- Stainless Steel pump with Viton Seal
- All plumbing and fittings are stainless steel
- Tri-Clamp connections are used
- Included water trap protects ozone generator from any water damage
Related Files
|
Mazzei Injector |
| 5.5K | |
|
Waterzone Optional Equipment |
| 45.6K | |
|
|
Ozone Solubility in Water |
| 160K |
| Product ID: | WATERZONE-SS-40 | |
| Lead Time: | 2 weeks |
Click HERE to contact us for more information on the Waterzone-40
Optional Equipment
| Optional Equipment | Description |
|---|---|
| Water Flow switch | Will start and stop system automatically based upon water flow |
| Dissolved Ozone Sensor | Monitors, displays, and controls actual ozone levels in the water |
| ORP Monitor | Monitors ORP level in the water, will also control dissolved ozone levels in the water |
| Ambient Temp Sensor | Monitors Ambient temperature to protect ozone generator and oxygen concentrator |
| Ambient Relative Humidity Sensor | Monitor Relative Humidity to protect the oxygen concentrator and shuts down O2 Concentrator |
| Hour Meter | Displays Ozone generator run time, good for determining required maintanance intervals |
| Ozone Destuct Unit | Will revert all excess ozone from the contact tank to oxygen |
| Remote Ozone Monitor | Will monitor ozone in a remote location, useful when the Waterzone system will placed remotely from the point of use |
| Recirculation Pump | Additional Water Pump to provide water recirculation |
Specifications
Enclosure: | Stainless Steel Nema 4X |
Flowrates: | Up to 70 GPM water flow (flow rates from 5-70 GPM are acceptable) |
Ozone Production: | 40 gm/hr |
Oxygen Production: | 10 LPM O2 @ 93% purity |
Capacity: | Will dissolve ozone into water at the following rates: |
36 GPM with 4.0 PPM Ozone | |
70 GPM with 2.0 PPM Ozone | |
Dissolved ozone levels of at least 2.0 PPM at 70 GPM | |
Wetted Materials: | Stainless Steel, Viton seals & Kynar injector |
Remote Start: | System can be started remotely using provided contacts in the controller |
Ozone Generation Method: | Via corona discharge using dry air |
Maximum Operating Pressure: | 50 PSI (3.5 Bar) |
Maximum Water Pressure: | 100-PSI (7 bar) |
Water Connection: | 1.5-in FNPT inlet & outlet |
Compressed Air: | 4 CFM Compressed Air @ 50 PSI Necessary - Clean Dry Compressed Air |
Power Required: | 220V/60Hz (220V/50Hz Available) |
Water Pressure drop at 50 GPM | less than 3 PSI |
Warranty: | 1-year |
Dimensions: | 20-inches deep x 38-inches wide x 66-inches tall |
Weight: | 500 lbs |
