80 Grams/Hour Ozone Injection System
80 grams/hour ozone injected into water streams up to 140 GPM
Ozone Injection System quickly integrates into existing water line. The Waterzone system produces 80 g/hr of ozone and injects this ozone into water flows up to 140 GPM. This water can be used for food processing, surface disinfection or basic water treatment.
Features
- Introduces 80 grams/hour ozone into up to 140 GPM water flows
- Produces ozone from integrated Oxygen Concentrator
- PMWill provide 140 GPM Water Flow with 2.0 PPM Dissolved Ozone Level
- Dimensions: 36-in Deep x 42-in Wide x 72-in High - 625 Lbs
- Customizable system can be configured for your specific application
- Very efficient with excellent mass transfer of ozone
- Stainless Steel ASME off-gas tank
- Stainless Steel pump with Viton Seal
- All plumbing and fittings are stainless steel
- Tri-Clamp connections are used
- Included water trap protects ozone generator from any water damage
Related Files
|
Mazzei Injector |
| 5.5K | |
|
Waterzone Optional Equipment |
| 45.6K | |
|
|
Ozone Solubility in Water |
| 160K |
| Product ID: | WATERZONE-80 | |
| Lead Time: | 2 weeks |
Click HERE to contact us for more information on the Waterzone-80
Optional Equipment
| Optional Equipment | Description |
|---|---|
| Water Flow switch | Will start and stop system automatically based upon water flow |
| Dissolved Ozone Sensor | Monitors, displays, and controls actual ozone levels in the water |
| ORP Monitor | Monitors ORP level in the water, will also control dissolved ozone levels in the water |
| Ambient Temp Sensor | Monitors Ambient temperature to protect ozone generator and oxygen concentrator |
| Ambient Relative Humidity Sensor | Monitor Relative Humidity to protect the oxygen concentrator and shuts down O2 Concentrator |
| Hour Meter | Displays Ozone generator run time, good for determining required maintanance intervals |
| Ozone Destuct Unit | Will revert all excess ozone from the contact tank to oxygen |
| Plant Compressed Air | Use customer supplied compressed air and remove system compressor and replace with pressure regulator, and filter and offers lower power consumption and less system maintenance |
| Remote Ozone Monitor | Will monitor ozone in a remote location, useful when the Waterzone system will placed remotely from the point of use |
| Recirculation Pump | Additional Water Pump to recirculate water through system |
Specifications
| Flowrates: | Up to 140 GPM water flow (flow rates from 5-140 GPM are acceptable) |
| Ozone Production: | 80 gm/hr |
| Oxygen Production: | 20 LPM O2 @ 93% purity |
| Capacity: | Will dissolve ozone into water at the following rates: |
| 70 GPM with 4.0 PPM Ozone | |
| 140 GPM with 2.0 PPM Ozone | |
| Dissolved ozone levels of at least 2.0 PPM at 140 GPM | |
| Wetted Materials: | Stainless Steel, Viton seals & Kynar injector |
| Power Required: | 220V/60Hz (220V/50Hz Available) |
| Remote Start: | System can be started remotely using provided contacts in the controller |
| Ozone Generation Method: | Via corona discharge using dry air |
| Maximum Operating Pressure: | 50 PSI (3.5 Bar) |
| Maximum Water Pressure: | 100-PSI (7 bar) |
| Water Connection: | 2-inch tri-clamp inlet & outlet |
| Water Pressure drop at 50 GPM | less than 3 PSI |
| Warranty: | 1-year |
| Dimensions: | 36-inches deep x 42-inches wide x 72-inches tall |
| Weight: | 625 lbs |
