30 Grams/Hour Ozone Injection System
30 grams/hour ozone injected into water streams up to 50 GPM
Ozone Injection System designed to quickly integrate into an existing water line. The WATERZONE system produces and introduces 30 g/hr of ozone into up to 50 GPM of water flow. This water can be used for food processing, surface disinfection or basic water treatment.
Features
- Introduces 30 grams/hour ozone into up to 50 GPM water flows
- Produces ozone from integrated Oxygen Concentrator
- Will provide 50 GPM Water Flow with 2.0 PPM Dissolved Ozone Level
- Dimensions: 18-in Deep x 44-in Wide x 70.5-in High - 450 Lbs
- Customizable system can be configured for your specific application
- Very efficient with excellent mass transfer of ozone
- Stainless Steel AMSE Stamped off-gas tank
- Stainless Steel pump with Viton Seal
- All plumbing and fittings are stainless steel
- Tri-Clamp connections are used
- Included water trap protects ozone generator from any water damage
Related Files
|
Mazzei Injector |
| 5.5K | |
|
Waterzone Optional Equipment |
| 45.6K | |
|
|
Ozone Solubility in Water |
| 160K |
| Product ID: | WATERZONE-30 | |
| Lead Time: | 2 weeks |
Click HERE to contact us for more information on the Waterzone-30
Optional Equipment
| Optional Equipment | Description |
|---|---|
| Water Flow Switch | Will start and stop system based completely on water flow |
| Dissolved Ozone Monitor | Monitors and control ozone level in the water (in ppm) |
| ORP Monitor | Monitors ORP level in water, will also control ozone level with indirect reading |
| Remote Ozone Sensor | Monitor ozone levels near water point of use for safety purposes |
| Temperature Sensor | Monitors ambient temperature to keep ozone generator safe (necessary if internal compressor is used) |
| Relative Humidity Sensor | Monitor Relative Humidity to protect the oxygen concentrator (necessary if internal compressor is used) |
| Hour Meter | Displays Ozone generator run time |
| Ozone Destruct Unit | Will destroy all undissolved ozone from contact tank, includes water trap |
| Air Compressor | Add internal Air compressor to provide compressed air for oxygen concentrator – eliminates the need for compressed air supply |
Specifications
Flowrates: | Up to 50 GPM water flow (flow rates from 5-50 GPM are acceptable) |
Ozone Production: | 30 g/hr |
Ozone Concentration: | Ozone Generated at 5% by Weight |
Oxygen Production: | 15 SCFH |
Capacity: | Will dissolve ozone into water at the following rates |
25 GPM with 4.0 PPM Ozone | |
50 GPM with 2.0 PPM Ozone | |
Dissolved ozone levels of at least 2.0 PPM at 50 GPM | |
Compressed Air | 4CFM @ 50 PSI |
Wetted Materials: | Stainless Steel, Viton seals & Kynar injector |
Power Required: | 220V/60Hz (220V/50Hz Available) |
Remote Start: | System can be started remotely using provided contacts in the controller |
Ozone Generation Method: | Via corona discharge using dry air |
Maximum Operating Pressure: | 50 PSI (3.5 Bar) |
Maximum Water Pressure: | 100-PSI (7 bar) |
Water Connection: | 1.5-in Sanitary connections inlet & outlet l |
Water Pressure drop at 50 GPM | less than 3 PSI |
Warranty: | 1-year |
Power Consumption: | 1100 watts average using plant compressed air |
1400 watts average using internal air compressor | |
Dimensions: | 18-inches deep x 44-inches wide x 70.5-inches tall |
Weight: | 450 lbs |
