10 g/hr Ozone Generator
10 g/hr Ozone from only 5 LPM Oxygen!
The TG-10 a very efficient ozone generator producing 10 g/hr ozone from only 5 LPM oxygen. The TG-10 is a microprocessor controlled ozone generator that will operate under almost any pressure and flow while tuning itself for optimum performance.
| Product ID: |
TG-10 |
|
| Lead Time: | 2 days |
| Price: |
$2,950.00 |
TG-10 Output Ratings
| Oxygen Flow | Ozone Output |
|---|
| 3 LPM | 9 g/hr |
| 5 LPM | 10 g/hr |
| 10 LPM | 12 g/hr |
Optional Flowmeter
Add an optional flowmeter to your TG-10. (choose no more than one of the options below)
| Item | Price | Choose 1 |
|---|
| 0-20 LPM Acrylic Flowmeter | $105.00 | |
| 0-10 LPM Acrylic Flowmeter | $95.00 | |
| High accuracy 0-10 LPM Aluminum Flowmeter | $95.00 | |
Optional Pressure Gauge
To add an optional pressure gauge to your TG-40, choose no more than one of the options below.
| Item | Price | Choose 1 |
|---|
| 0-30 PSI Pressure Gauge | $95.00 | |
| 0-60 PSI pressure Gauge | $95.00 | |
Optional Connections (Connectors)
The TG-10 comes standard with 1/4-in stainless steel compression fittings. If your needs are different, chose one of the options below.
| Item | Description | Price | Choose 1 |
|---|
| NPT IN/OUT | 1/4 inch FNPT Inlet and Outlet Connections | $55.00 | |
Ozone Output Control
Adding an ozone output control allows you to control the generator output remotely. Choose from one of two types of input ranges.
| Item | Description | Price | Choose 1 |
|---|
| 4-20 mA Input | 4-20 mA Input to adjust output 0-100% | $200.00 | |
| 0-10 Volt Input | 0-10 Volt Input to adjust output 0-100% | $200.00 | |
Power Option
The TG-10 is equipped to use standard 110V US alternating current. If you require 220V, chose the option below:
| Item | Price | |
|---|
| 220V/50Hz Power Option (Includes country-specific power cord.) | $150.00 | |
Specifications
| Ozone Output | 10 gm/hr (nominal) |
| Feed Air Requirements: | 0-10 LPM of 90-95% oxygen |
| Operating pressure: | 5-15 PSI produces best ozone productions |
| Max Pressure: | Up to 80 PSI |
| Connections: | 1/4-inch Stainless Steel Compression |
| Protection | unit shuts down if temp exeeds 120-deg F or water entres corona cell then resumes production when conditions improve |
| External Control | Yes: 4-20mA |
| Indicator: | Light to indicate ozone inverter is ON |
| Cooling: | Air Cooled with integrated fans |
| Power Requirements: | 120V/60Hz, 3 Amps |
| Power Consumption: | 275 Watts |
| Dimensions: | 7 x 19 x 17-in (HxWxD) 18 x 48 x 43-cm |
| Weight: | 23 lbs (11-kg) |
| Shipping Weight: | 26 lbs (12-kg) |
