High Flow Ozone Injection System
30 GPM Ozone Injection System
The SS-30 is a fully automated stainless steel ozone injection system. Incoming water is dosed with ozone to attain dissolved ozone levels exceeding 3 PPM. A venturi coupled with a high efficiency static mixer results in mass transfer rates approaching 90%.
Features
- turnkey system ready for installation
- high ozone dosage
- ozone controller ensures continuous automated operation
- simple one switch start-up & shut-down
- 60 gallon tank holds ozonated water until it is needed
| Product ID: | SS-30 | |
| Lead Time: | 7 weeks |
Specifications
| Ozone Production | 16 gm/hr shown (up to 64 gm/hr with the addition of 3 more ozone generators) |
| Water Flowrate | 30 GPM (112 lpm) |
| Safety | Ozone leak detection and shut-down |
| Maximum Pressure | 30 PSI (2-bar) |
| Feedgas to Ozone Generator | dry air |
| Ozone Injection | Kynar Venturi followed by vortexing static mixer |
| Controller Features | |
| Hour meter tells duration of ozone production | |
| High air dryer dewpoint interlock | |
| Air dryer shutdown if R.H. gets too high | |
| Ozone Leak detection & generator shut-down | |
| Ozone production starts once suction from venturi is detected | |
| High temperature shutdown | |
| Inlet/Outlet Connections | 1.5-in FPT |
