Inexpensive Ambient Ozone Sensor

Low Cost Ozone Monitor

  • Constantly monitors your work environment
  • No installation required. Easily understood by non-technical personnel
  • Lowest cost

Product ID: EZ-1X        Lead Time: 2 weeks


EZ-1X $325.00

Overview

EZ-1X Ozone Monitor for ambient ozone detection. Internal battery provides portable ozone detection anywhere you go. 0.02-0.14 PPM range. Ensures you and your personnel are safe.

Specifications

Range 0.02-0.14ppm
Accuracy 20% in the 0.05-0.1 ppm range
Resolution 0.01
Response time Will be less than 10 seconds, after sensing the ozone
Sensor Type HMOS (heated metal oxide semiconductor) sensor
Display Bargraph. Normally green. Yellow at 0.05 ppm (caution). Red at 0.1 ppm (danger)
Alarm Red LED
Temperature Range 60-80 F (16-27 C)
Battery Self-contained NiMH. Approximately 8 hour capacity. Recharged by AC adapter overnight
Power Requirements 12-24 VDC at 300 mA, 120V/60Hz AC Adapter included
Size 3 x 2 x 1-in (HxWxD) 8 x 3 x 6-cm
Weight 6 oz (154 g)
Supporting documents User Manual & NIST Traceable Calibration Sheet Included
Warranty 1 yr

Support

Downloads

Frequently Asked Questions

How often does this monitor require calibration?

The manufacturer recommends a yearly calibration. The readings of all ozone monitors will start to stray over time and need to be corrected when possible.

What happens if the monitor is used in temperatures above 104 deg. F?

Because this monitor utilizes a Heated Metal Oxide Semiconductor (HMOS) to detect ozone, high ambient temperatures could likely push the sensor-heater above its safe operating temperature, causing permanent damage.

Will I get a tracking number when my item ships?

For customers who chose UPS: a tracking number is automatically sent via e-mail before the order leaves our warehouse.

For customers who chose FedEx: a tracking number is usually available if requested by either e-mail or phone.

For customers who chose USPS: tracking numbers are only created by USPS for select services, such as insured packages. We will be happy to provide available tracking information if requested.

Related Information

Ozone Monitor Calibration

Short Video Demonstrating Ozone Monitor Calibration

Related Products

C-30ZX

Inexpensive Ozone Sensor with relay outputs!

Ozone Sensor w/ Relays

Inexpensive ozone sensor with relay outputs & LED display. Low cost ozone sensor. NO/NC relays with audible alarm.

  • Relay Outputs
  • Audible Alarm
OG-3

Ozone Checker

Inexpensive Ozone Checker

The OG-3 uses a precision quartz UV lamp ozone generator. Its output is adjusted in our laboratory by comparison with a NIST traceable standard. Not recommended for calibration purposes.

  • generates a consistent 0.1 PPM ozone concentration
  • easily adapts to the A-21ZX, EZ-1X, C-30ZX & OS-1X
  • NIST traceable before shipment

Last Updated: May 18, 2012 4:52pm

The Web's Largest Supplier of Ozone Products

Partner Sites

We've updated this page and want to know what you think. For a $5 discount, take a look at the old version of this page and answer a few questions about it.