Ambient Ozone Monitor - C-30ZX

Overview

The C-30ZX Ozone Monitor is a great wall mount ozone detector for OSHA safety levels of ozone.  Ozone detection range of 0.02 - 0.14 ppm.  Includes an audible alarm, relay controller, and 0-2 VDC output for remote use.  Small, compact and easy to use, the C-30ZX is a great addition to any ozone system for ozone safety and control.  

Features

• LED readout changes color as ozone level increases
• Audio alarm and output for data logger
• Connections for external equipment control
• For general monitoring and ozone control

Specifications

• Range: .02-.14ppm of ozone (LED scale); .02-.30 ppm via external data readout
• Bargraph Display: Normally green; yellow at .05 ppm (caution); red at .1 ppm (danger)
• Response time: Within tenths of seconds of ozone reaching the sensor
• Measurement principle: HMOS (heated metal oxide semiconductor) sensor
• Size: 85 × 35 × 60 mm (3.25 × 1.375 × 2.375 in)
• Weight: 140 gr (5 oz)
• Power requirements: 12 VDC at 300 mA. AC adapters available worldwide.
• Outputs: LED bargraph, audio alarm, 0-3 V analog output such as for data loggers, and external alarm relay contacts; alarm actuation and relay contact closure at .1 ppm (standard) and is programmable.

Seller warrants that all Products will conform to the Specifications and will be free from defects in material workmanship and programming. Claims for Products not complying with this warranty shall be submitted by Buyer no later than 12 months from delivery date to Buyer. Seller shall promptly repair or replace, at its option and expense, non-complying Products. The shipment of non-complying Products by Buyer to Seller, and the return shipment of repaired or replacement Products by Seller to Buyer shall be at Seller's expense, unless it shall be determined that Buyer returned a Product that was in compliance, in which case such cost shall be borne by Buyer and, if paid by Seller, these expenses shall be reimbursed by Buyer within thirty (30) days of notice by Seller. Buyer shall receive a credit for any non-complying Products returned for repair or replacement. All non-complying Products shall be returned to Seller (at its offices or as otherwise instructed) no later than 30 days as of the date the non-compliance of any such Product has been discovered. Seller is NOT responsible for any/all damages suffered to the Products that is caused by the Buyer. Such as but not limited to damage by wrong electrical current, damage through crush or dropping the product, damage through untrained users of Product, damage through improper operations.